Flasher Archive

[Previous] [Next] - [Index] [Thread Index] - [Previous in Thread] [Next in Thread]


Subject: Re: FLASH: roll over, roll out I FIGURED IT OUT!!!
From: Charlene Reese
Date: Wed, 10 Feb 1999 18:44:10 GMT

I must have just been tired last night.
I had the roll out action on the button in the frame you initially rollover
but not in the one where you end up.
The blank state that you need to get out of.
Never... Mind...
-charlene

On 2/9/99, Charlene Reese wrote:
>Hopefully someone can shed some light on something I'm trying to do.
>
>I've decided to use 6 diff movies as the second movie you get after making
>one of 6 choices in a home pg movie.
>
>When loaded it cycles through the 6 choices and stops on the one you had
>just picked.
>I have a rollover set that first goes to a blank section of the movie to
>remove the art that was being displayed
>then the actual rollover of the button cicks in - any of the 6 works fine
>however when you roll out you are still in the blank state and I'd like the
>rollout to return you to the state that shows the art for that particular
>page. This is the best I can explain it.
>
>Here's the button action script:
>On (Roll Over)
> Go to and Stop
>End On
>On (Roll Out)
> Go to and Stop
>End On
>On (Release)
> Go to and Stop
> Get URL
>End On
>
>The first stop is at "no" the blank frame
>The roll out is at "purpose" the present page frame where you were before
>you rolled over to "no"
>And the release go to and stop takes you to the new destination frame and
>then loads that html page into a frame below.
>
>The roll out does not work.
>What am I missing? Am I using the rollover and roll out correctly in
>relation to each other?
>To see what I'm doing go to:
>http://www.thinkdeep.net/indexfl.htm (click on purpose)
>Then on the next page its the "site help" rollover that is suposed to roll
>out back to purpose but doesn't.
>thanks to anyone willing to take a look
>and i promise that if i ever get the hang of this I'll help out too.
>-charlene
>
>--------------------------
>Charlene Reese - S r T e U e D s I e O
>Digital Graphic Design for Print, Multimedia and the Web
>catreesestudio [dot] net http://www.reesestudio.net
>949.766.7822
>
>
>
>------------------------------------------------------------------------
>To UNSUBSCRIBE send: unsubscribe flasher in the body of an
>email to list-manageratshocker [dot] com. Problems to: owneratshocker [dot] com
>N.B. Email address must be the same as the one you used to subscribe.
>For info on digest mode send: info flasher to list-manageratshocker [dot] com


--------------------------
Charlene Reese - S r T e U e D s I e O
Digital Graphic Design for Print, Multimedia and the Web
catreesestudio [dot] net http://www.reesestudio.net
949.766.7822



------------------------------------------------------------------------
To UNSUBSCRIBE send: unsubscribe flasher in the body of an
email to list-manageratshocker [dot] com. Problems to: owneratshocker [dot] com
N.B. Email address must be the same as the one you used to subscribe.
For info on digest mode send: info flasher to list-manageratshocker [dot] com


Replies
  Re: FLASH: browser sensing, Erik [gearik] Mattheis
  FLASH: browser sensing, Bob Schwartz
  FLASH: roll over, and then roll out, Charlene Reese

[Previous] [Next] - [Index] [Thread Index] - [Next in Thread] [Previous in Thread]