Flasher Archive

[Previous] [Next] - [Index] [Thread Index] - [Previous in Thread] [Next in Thread]

Subject: Re: FLASH: Trouble executing loop...
From: Mike Chambers
Date: Sun, 31 Oct 1999 02:30:40 GMT

Thanks John...

that was my problem...

I fixed it by loading the variables in frame 1,

checking to see if the variable have been loaded in frame 2,

then in frame 3 if the variabels are not loaded i go back to frame 2,
otherwise i begin my loop using the loaded variables.

Thanks again...

Mike C

meshatex-pressnet [dot] com

----- Original Message -----
From: John Croteau <croteauaterols [dot] com>

> You are running the loop before the data has been received.
> Even from a text file on a local hard drive the data called with Load
> Variables will not be received immediately.
> You need to do some sort of test to verify that the data has arrived
> before proceeding with processing that data.

flasher is generously supported by...
Streaming Media WEST '99 Conference & Exhibition
"The Worlds largest Internet Audio & Video Event"
December 7 - 9, San Jose Convention Center, California

Reserve your space today at http://www.streamingmedia.com
To unsubscribe or change your list settings go to
http://www.chinwag.com/flasher or email helpatchinwag [dot] com

  FLASH: Site Check, Mark Tonino
  Re: FLASH: Site Check, Deon's Oogle Box
  FLASH: Trouble executing loop..., Mike Chambers
  Re: FLASH: Trouble executing loop..., John Croteau

[Previous] [Next] - [Index] [Thread Index] - [Next in Thread] [Previous in Thread]