Flasher Archive

[Previous] [Next] - [Index] [Thread Index] - [Previous in Thread] [Next in Thread]


Subject: Re: FLASH: GetTimer & Reset (Check please)
From: Marc Pidoux
Date: Mon, 1 May 2000 23:13:50 +0100

Thanks for the tips.
I just divied the centisecond by 4.1666 and it works!
For the date, i "hacked" your script...OK?

I put it online. Can you check it and give me some feedbacks before i show it to
the client.

http://www.dreams4you.com/clients/frames/

Thanks

Marc

(N.B. Does any one have another font like "digital style" nicer as the one i am
using?. If yes, can you send it to me directly? Thanks)


Jason Bouwmeester a écrit :

> Well, the first thing that I noticed here is that you are using the frames
> as an indication of seconds. Not every computer, actually hardly a lot, will
> play at the 24fps so you will find that your seconds are out. Check out
> www.bloodykisses.com/flash/datetime/datetest.html and if it looks like what
> you need I can send you the .fla.
>
> HTH,
> jb
>
> -----Original Message-----
> From: Marc Pidoux [marcatpidoux [dot] com (mailto:marcatpidoux [dot] com)]
> Sent: Sunday, April 30, 2000 9:59 AM
> To: flasheratchinwag [dot] com
> Subject: FLASH: GetTimer & Reset
>
> Hi,
>
> For a web site about films, I would like to put a counter which will
> start as the person is on the web site.
>
> This counter has to count:
> 1. The minutes
> 2. The seconds
> 3. The frames (where 24 frames=1 second)
>
> I would like to use the "GetTimer" function.
>
> So, now how can you (which action? how to write it?) display the time
> of the frames and restarting at "1" after the number "24" and add "1" at
> the seconds.
>
> I was trying and couldn't manage the 24 frames part.
>
> Any help?
>
> Thanks
>
> Marc
>
> Here is a script action I was trying but it is displaying the time as
> minutes/seconds/centiseconds.
> The centiseconds are reseting after "100" and this is not what I need.
>
> If (Now > 1000)
> Set Variable: "Minutes" = Int((Substring ( Now, 1, (Length ( Now )
> - 3))) / 60)
> Set Variable: "Seconds" = Int((Substring ( Now, 1, (Length ( Now )
> - 3))) - (Minutes * 60))
> End If
> Set Variable: "Centiseconds" = Int(Substring ( Now, (Length ( Now ) -
> 2), 2 ))
> If (Centiseconds < 10)
> Set Variable: "Centiseconds" = "0" & Centiseconds
> End If
> If (Seconds < 10)
> Set Variable: "Seconds" = "0" & Seconds
> End If
> If (Minutes < 10)
> Set Variable: "Minutes" = "0" & Minutes
> End If
> If (Int(Minutes) > 59)
> Call ("Reset")
> End If
> Go to and Play ("Get Time")
>
> flasher is generously supported by...
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Get the last 100 messages from the flasher list NOW
> http://www.chinwag.com/flasher/last100.shtml
>
> Flash books http://www.chinwag.com/flasher/books.shtml
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> To unsubscribe or change your list settings go to
> http://www.chinwag.com/flasher or email helpatchinwag [dot] com
>
> flasher is generously supported by...
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Get the last 100 messages from the flasher list NOW
> http://www.chinwag.com/flasher/last100.shtml
>
> Flash books http://www.chinwag.com/flasher/books.shtml
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> To unsubscribe or change your list settings go to
> http://www.chinwag.com/flasher or email helpatchinwag [dot] com


flasher is generously supported by...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Get the last 100 messages from the flasher list NOW
http://www.chinwag.com/flasher/last100.shtml

Flash books http://www.chinwag.com/flasher/books.shtml
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To unsubscribe or change your list settings go to
http://www.chinwag.com/flasher or email helpatchinwag [dot] com

Replies
  RE: FLASH: GetTimer & Reset, Jason Bouwmeester

[Previous] [Next] - [Index] [Thread Index] - [Next in Thread] [Previous in Thread]