RE: FLASH: Dual Monitor Win98-setting primary

[GDavies]

I;m using a matrox Millenium II 4mb PC and a STB 4400 AGP 32MB (STB is

primary)


just for the record... did you check you motherboard bios and make sure the

chipset features are set to AGP to be primary?  I had the same problem as

you as my primary was set to PCI, but I only had AGP the board is smart

enough to switch to AGP.  When adding a second card, the board thought I

really wanted the PCI to be primary so did as its told.  I uninstalled the

driver for the millenium II, rebooted, set the Asus bios to set AGP as

primary, rebooted and all was cool after the driver install.


Good Luck

Grant

j a v a  j u n k i e


Grant Davies 

iXL Atlanta 


flasher is generously supported by...

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     flashforward2000 and The Flash Film Festival

  "The World’s Premier Flash Solutions Conference and Expo"

 March 27-29, Nob Hill Masonic Center, San Francisco, California


-Register before Feb 25 and save $200!!-- www.flashforward2000.com

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

To unsubscribe or change your list settings go to

http://www.chinwag.com/flasher or email

helpchinwag [dot] com