Re: FLASH: Resolution (800x600 vs...)

[suraj prabhu]

it's better to go for a 1024x768 resolution and then have other scale it

down..... to whatever thwy want....the otehr way around doesn't give that

sharp images...just make sure that if ur using fonts use narrow fonts and

preferably not bold becoz they tend to be a bit blurred.

----- Original Message -----

From: james <

james_mailingyahoo [dot] com

>

To: flash <

flashershocker [dot] com

>

Sent: Wednesday, September 01, 1999 8:21 PM

Subject: FLASH: Resolution (800x600 vs...)



> Whoops - hit the wrong button before.

>

> I'm setting up the foundation for a movie that will be

> quite lengthy and I'm trying to avoid massive changes

> down the road.

>

> This movie we'll be shown over a projector capable of

> up to 1024x768 resolution, and I know the presenter's

> laptop is capable of that as well.  However, I'm

> concerned that if we ever distribute this presentation

> to others, their laptops or even their desktops are

> probably only capable of 800x600 (or at least that's

> where they are set).

>

> So, the question is, is it better to create the

> presentation at 800x600 and let the presenter's

> laptop/projection scale up and that way the clients

> will be able to view the 800x600 as it is.  OR, is it

> better to develop at the max resolution (1024x768) and

> have the presenter show as is without scaling but the

> clients will need to scale down the presentation to

> 800x600 when viewing.

>

> What's a better scenario?  I can always do everything

> 800x600 and even have the presenter change the

> settings on the laptop/projector if that's a concern.

> I'm just concerned how things will scale at the

> different, full-screen resolutions.

>

> TIA!

>

>

>

> __________________________________________________

> Do You Yahoo!?

> Bid and sell for free at http://auctions.yahoo.com

>

> ------------------------------------------------------------------------

> To UNSUBSCRIBE send: unsubscribe flasher in the body of an

>

email to list-managershocker [dot] com. Problems to: ownershocker [dot] com

> N.B. Email address must be the same as the one you used to subscribe.

>

For info on digest mode send: info flasher to list-managershocker [dot] com

>



------------------------------------------------------------------------

To UNSUBSCRIBE send: unsubscribe flasher in the body of an

email to

list-managershocker [dot] com

.  Problems to:

ownershocker [dot] com

N.B. Email address must be the same as the one you used to subscribe.

For info on digest mode send: info flasher to

list-managershocker [dot] com