Flasher Archive
[Previous] [Next] - [Index] [Thread Index] - [Previous in Thread] [Next in Thread]
Subject: | Re: FLASH:DRAWING TOOLS: Create a corner |
From: | John Croteau |
Date: | Fri, 21 Aug 1998 14:09:37 +0100 |
Hi Tommy,
> In Flash 3, the Help states that if you want to create a sharp corner in a
> line, CNTRL-drag the point at which you want the corner to appear. This
> doesn't work. The control-drag looks the exact same as normal drag,
> shift-drag, command-drag, etc.
There is no cursor change to indicate the difference. If you drag on a
line normally it will pull out curved but if you control-drag then
indead it will create a new point and a potential sharp corner. Try
pulling out a little further to see the change more easily.
----------- -----------------------
John Croteau croteauerols [dot] com (mailto:croteauerols [dot] com)
------------- -------------------------
Flash Central(The Universe Starts Here) http://www.FlashCentral.com/
FlashTeK(Advanced Websites with Flash) http://www.CrownMall.com/Flash/
The Flash Tech Resource (Tech Notes) http://www.FlashCentral.com/tech/
Need a PC ? -- Computer King -- http://www.crownmall.com/computers/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
------------------------------------------------------------------------
To UNSUBSCRIBE send: unsubscribe flasher in the body of an
email to list-managershocker [dot] com. Problems to: ownershocker [dot] com
N.B. Email address must be the same as the one you used to subscribe.
For info on digest mode send: info flasher to list-managershocker [dot] com
Replies
Re: FLASH:DRAWING TOOLS: Create a corner, Tommy D'Aquino
Replies
FLASH:DRAWING TOOLS: Create a corner, Tommy D'Aquino
[Previous] [Next] - [Index] [Thread Index] - [Next in Thread] [Previous in Thread]